ALERT: Due to the inclement weather across much of the country, Medtronic deliveries are currently experiencing delays and there will be longer than normal hold times on the phone. Visit if you need to place an order, get a sensor or belt clip replacement, or check the status of your supply order. X

MiniMed 630G System Support

MiniMed 630G System Support   >   Inserting Your Sensor and Connecting the Transmitter

Inserting Your Sensor and Connecting the Transmitter

Device: MiniMed 630G insulin pump (MMT-1715K)

Choose a location for inserting your sensor. Shown here are the best body areas (shaded) for sensor insertion:

Note: Clinical trials of sensor accuracy have been based on sensors inserted in the belly area. Sensor performance may differ when other insertion sites are used.

Avoid inserting the sensor:

  • Into the 2-inch (5.0 cm) area around your belly button
  • Where your body naturally bends a great deal
  • In areas where clothing might cause irritation (for example your beltline)
  • Where you have scarred or hardened tissue or stretch marks

For Enlite sensor, your sensor should be at least:

  • 2 inches (5.0cm) away from your navel
  • 1 inch away from your insulin pump infusion site
  • 1 inch away from any other insulin needle injection site (syringe, pen)

Download step by step instructions in a PDF format for the Enlite Sensor Taping Tips Quick Reference Guide for the Enlite Sensor and One-press Serter

Tip for Enlite Sensor Success Picture

Tip 1: Making sure your Enlite sensor is secure is important. Check out the Enlite Tape Tips, which may be helpful for people who experience adhesion or skin irritation issues.

Enlite Sensor Taping Tips Enlite Sensor Taping Tips »