Connecting the meter


Device: MiniMed™ 670G insulin pump (MMT-1780K)

The Contour® NEXT LINK 2.4 meter is the only meter that communicates wirelessly with your MiniMed 670G insulin pump. This allows you to automatically send your glucose readings to your pump, give remote boluses, and upload your pump and meter information to CareLink®software.

INSTRUCTIONS

1. Hold the Menu button until the meter turns on.

Meter

2. Scroll to your language and press OK. Press OK to confirm.

Language selection

3. Press OK when asked Connect to a MiniMed® Pump?

Connect to pump screen

4. Press OK.

Select OK screen

5. Press Auto Connect. Put the meter down and pick up your pump.

Select Auto Connect screen

6. Press Menu.

7. Select Options.

8. Select Utilities.

9. Select Device Options.

10. Select Connect Device.

Select Connect Device screen

11. Select Auto Connect on your pump.

Select Auto Connect screen

12. Press Select.

13. Press Down.

Press Down screen

14. Select Continue. Place the meter and pump next to each other.

Select Continue screen

15. Select Search on your pump.

Select Search screen

16. Select Search on your meter. The search may take up to 2 minutes.

17. Check to see that the Device SN (serial number) on the pump screen matches the Device SN on the meter.

Confirm serial number screen

18. If they match select Confirm on the pump.

19. Check to see that the SN on the back of the pump matches the SN now on the meter screen. Select Next on the meter.

Pump connected screen

20. Press Always.*

Select Always screen

21. Then press OK.

22. Select the desired Date Format.

Date format screen

23. Press OK. If time and date are not correct you must change them on the pump.

Date and time screen

24. Press Accept to select AutoLog is Off. AutoLog allows you to mark a test result as Before Meal, After Meal or Fasting.*

Autolog screen

25. Accept or Change High and Low Alerts.*

High and low alerts screen

26. Accept or Change the Target Range.* Press Accept again to confirm.

Target screen

27. Setup is now complete and you are ready to use the meter.

Setup complete screen

*For more detail on this feature see your meter guide.